R series Co2 laser tube

R series laser products updated upon techniques and technology of traditional products.
20% enhancement in power and 30-100% extended working life.
This series is testified by the market per its good performance and better cost-efficiency.

ꄲNext： 300W Co2 Laser Tube

This series are cost-effective, technology is mature and stable. It has been supplied to many large-scale laser enterprises, and export with the whole machine, its stable output power and good spot beam have been accepted and recognized by customers for many years.
Technology Parameter :

Model	Length	Diameter	Rated Power	Peaking Power	Current	Voltage	Water Flow	Warranty
1200-G	1200	Φ55±2	65	70	18	25Kv	6 L/min	6 Months
1600-G	1600	Φ60±2	100	110	28	18Kv	8 L/min	6 Months
R3	1250	Φ80±2	90	100	26	16Kv	7 L/min	10 Months
R5	1450	Φ80±2	100	130	30	18Kv	8 L/min	10 Months
R7	1650	Φ80±2	130	160	32	20Kv	10 L/min	10 Months

1. Power Supply requirements

Input required AC 220 ~ 240AV / 50Hz

2.Water cooling requirements

Chiller requires the distilled water or the deionized water Low PH level, pure, no scale, no pollution, no viscous.

Water Temperature：20～30℃；

Lift：10M-15M;

Flow: 3L/min-12.8L/min。

3. Environmental requirements

Laser should work at room temperature for 15-30 ℃ and humidity for 30-60%.

The laser is equipped with a power supply that operates under a well ventail environment.

The work space needs to meet local safety standards for the operation of laser equipment.

4Installation

(1) Please install laser tube according to the marking on the laser tube, the best support position at the quarter of laser tube, as possible as keep the side up or side up indicator label, connect the wires of positive and negative terminal, inlet pipe and outlet pipe of the laser correctly.

(2) Turn on the chiller, adjust the laser tube direction, and ensure that the coolant is full of lasers and without bubble.

(3) Remove the window label and turn on the laser power supply to adjust the optical path.

Sometimes, to twist the laser tube angle so in order to adjust the laser beam is available.